Many families dream of having a backyard pool Swimming Pool Maintenance Service in UAE to enjoy on lazy summer days. However, installing the pool is not the only thing you need to worry about. Once you have installed your pool properly, it is your responsibility as the owner to maintain the pool regularly. If you neglect this important task, your pool can become damaged or even unsafe. However, maintaining a pool properly is not difficult.

Cleaning the pool

The biggest part of properly maintaining your pool is cleaning it effectively. Your pool has a filtration system that cleans and circulates the pool water. The most common filter uses sand to remove contaminants from pool water. This system needs cleaning.

To clean the pool water and filtration system, you should first remove any large particles, such as leaves, from the water. You can do this with a pool net. The filtration system removes smaller particles by sucking water through the sand filter. Your filter should be active for a minimum of six and a maximum of eight hours a day. It should turn on and off automatically. If you find that the filter is not as effective as it should be, you need to give it a thorough cleaning.

During peak swimming season, you should brush and vacuum the pool at least once a week. A large brush made for this job is scraped against the side walls of the pool. When the dirt settles to the bottom, a pool vacuum will remove it all. At the same time, it is a good idea to backwash the filter system. This reverses the flow and blows out any accumulated debris in the filter. You should be able to test the water and see a significant increase in flow. This is a good indication that it was done correctly.

Adjust the chemical values

After a thorough cleaning has been performed, it’s time to check the pH and chemical levels in the pool. Many pool owners don’t spend a lot of time making sure that proper balance is achieved in a backyard pool. However, it’s really easy to test your pool. You can buy a water test kit to help you keep track. After you determine these values, you can more effectively adjust the additives you add to the pool water. This not only makes swimming more comfortable, but also safer.

Trouble Shooting

If you pay enough attention to basic maintenance, you shouldn’t have many serious problems with your pool. However, some common problems are staining, chlorine burns, cloudy water, algae or sick swimmers. Of course, if you notice any of these problems, stop using the pool until you get to the bottom of the problem.

Some problems are more fixable than others and do not cause health problems. Algae, for example, can be easily treated by properly adjusting the chlorine level. Cloudy water could be an indication that the pool needs to be cleaned more frequently. Surprisingly, a strong chlorine smell can mean you’re actually not using enough. When there is not enough chlorine to break down contaminants in the water, chemical outgassing occurs.

Leave a Reply

Your email address will not be published.