Proper Swimming Pool Maintenance Service in Abu Dhabi is the only way to ensure a happy pool season! You can never be too careful and careful to avoid any pool problems. The maintenance of the pool requires a regular schedule to check and intervene in particular on the pump and the filter. Your maintenance schedule should be divided into daily, weekly, monthly and seasonal checks and routine follow-up procedures.
Regular maintenance involves cleaning, backwashing, and even occasionally shocking your pool, plus adding chemicals according to your regular water chemistry test results. As the health of the swimming pool depends a lot on the swimming pool equipment, these also require proper attention, cleaning and maintenance.
Swimming pool pumps are essential for the water to circulate optimally through the filters. Slow pumps can cause you major problems by promoting algae buildup and making the water unsuitable for swimming. An inefficient pump means you’d have dirt, debris and grime on the water as well as pool surfaces – not a pleasant sight and certainly not very attractive to swimmers! Pumps should be checked on a weekly basis and any torn valves or seals should be repaired immediately.
When choosing a pump, you should keep in mind the rate of rotation the pump is supposed to provide. An efficient pump would pass all of your pool water through the filtration system once every ten hours. To do this, it must be chosen according to the size of your pool, the right power and the best use of electricity. The efficiency of a pool pump can be measured in GPM or how many gallons of water it can pump every minute. Make sure that once you calculate the gallons per minute (GPM) rate for the pump, your plumbing and filter are compatible with that figure and are designed to handle it.
The pool filter is probably the most important investment you will make to keep your pool healthy! This is the gear that will supposedly trap all sorts of contaminants, dirt, and debris, so it’s not the best gear to pinch pennies on. In fact, go for the largest pool filter you can find for the capacity of your pool. Such an investment could actually save you money in the long run by reducing the number of chemical interventions you might otherwise need during the season to keep the pool clean. Your pool’s filtration system should be diligently monitored. If you notice a significant change in pressure, it means your filters need more thorough cleaning than backwashing. With sand filters, preventative maintenance primarily consists of checking for exhaustion. If you notice any, you need to fill the filter with the correct grade of sand. A good filtration system can potentially mean the difference between a great pool season and a tough one.